Safety Instructions - cecotec POWER TITANIUM 500 FRESH&GO Bedienungsanleitung

ENGLISH
1. SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the
appliance. Keep this instruction manual for future reference or
new users.
All safety instructions should be closely followed when using
the appliance.
Make sure that the mains voltage matches the voltage stated
on the rating label of the appliance and that the wall outlet is
grounded.
Do not immerse the cord, plug, or any non-removable part
of the appliance in water or any other liquid, nor expose the
electrical connections to water. Make sure your hands are dry
before handling the plug or switching on the appliance.
Warning: If the appliance falls accidentally in water, unplug it
immediately. Do not reach into the water!
Check the power cord regularly for visible damage. If the
cord is damaged, it must be replaced by the official Technical
Support Service of Cecotec, in order to avoid any type of
danger.
Warning: Do not use the appliance if its cord, plug or housing
is damaged, nor after it malfunctions or has been dropped or
damaged in any way.
Do not twist, bend, strain, or damage the power cord in any
way. Protect it from sharp edges and heat sources. Do not let
it touch hot surfaces. Do not let the cord hang over the edge
of the working surface.
The appliance is not intended to be operated by means of an
external timer or separate remote-control system.
Turn off and unplug the appliance from the mains supply
when not in use and before cleaning. Pull from the plug, not
the cord, to disconnect it from the outlet.
POWER TITANIUM 500 FRESH&GO 11
Power Titanium 500 Fresh&Go.indd 11 15/11/19 11:55