Safety Instructions; Parts And Components - cecotec CECOMIXER EASY WHITE Bedienungsanleitung

ENGLISH

1. SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
This appliance can be used by people with reduced physical,
sensory or mental capabilities, or lacking experience and
knowledge, provided that they are supervised or instructed on
the possible risks of the use of the appliance.
This device must not be used by children. Keep the appliance
and its cable out of the children's reach.
Keep plastic bags or packing elements out of the kid's reach.
They are potentially dangerous.
Do not connect the appliance without checking that the voltage
on the plate and that of your household are the same.
WARNING: Do not immerse the main body of the appliance in
water or any other liquid.
This appliance has been designed for domestic use only. It can
knead up to 0.5 kg. Do not use the appliance for longer than 15
minutes. After this period of time, allow the appliance to cool
down for a few minutes before using it again.
Do not leave the appliance unattended while in use.
Do not use the device unladen.
Children shall not play with the appliance. Keep the device out
of their reach.
Make sure neither the device nor its cable are in direct contact
with hot surfaces or objects.
Always disconnect it from the mains when assembling/
disassembling any of the accessories.
Do not leave the device plugged in if it is not going to be used.
If the power cord is impaired, it must be replaced by the official
Technical Support Service of Cecotec.

2. PARTS AND COMPONENTS

Fig. 1
1.
Body
2.
Titl support button
3.
Titl support
4.
Rods releasing button
8 CECOMIXER EASY WHITE
5.
Speed selector
6.
Rod holes
7.
Mixing rods
8.
Kneading rods
9.
Bowl
10.
Swivel base
11.
Bowl-slide knob
Fig. 2
Fig. 3
3. OPERATION
Keep pushing the tilt support button (2) and lift up the tilt support (3) (Fig. A).
For placing the bowl (9) on the swivel base (10), keep pressing the swivel base and turn the
bowl to the desired direction.
Place the rods you want to use into the support holes.
WARNING: The rods that have a ring in the axis must be placed in the hole with a bigger
diameter of the blender, specified by letter "R". If not, there is risk of spilling the dough.
MIXING RODS (7): For liquid mixtures, creams, egg whites, etc.
KNEADING RODS (8): For pastries and light doughs.
Place the rods in the corresponding holes, pressing and turning them until they fit perfectly.
Always use the rods jointly. Never place a rod of each kind.
Keep pushing the tilt support button (2) and lift up the tilt support (3) (Fig. 2).
Choose the speed with the speed selector (5).
We suggest starting the appliance at the lowest speed (position 1) and then gradually increase
the speed until reaching the higher speed (position 6). However, depending on the consistency
of the food, you may set the highest speed from the beginning.
Use the bowl slide knob (11) to move or keep the bowl still. Press and slide to the left to activate
the bowl slide. This will result on a more homogeneous mixture (Fig. 3).
Once done using the device, set the speed selector (5) to "0" position and unplug it from the
mains.
Keep pushing the tilt support button (2) and lift it up.
Press the rod release button (4) to release the rods.
Keep the swivel base still and turn the bowl in the desired direction for removing the bowl.
ENGLISH
CECOMIXER EASY WHITE 9