KIDDY Phoenix fix3 Bedienungsanleitung Seite 34

EN
The kiddy phoenixfix 3 is secured with the 3-point vehicle seat belt on the
impact shield belt guides (M) (Fig. 18).
The seat cushion (I) must be used for children weighing up to
!
11 kg. See Point 4.1 for this.
Place your child in the seat, making sure that your child's is positioned all the
way against the back rest (B).
Slide the impact shield (L) with impact shield arms (N) under the arm rests (C)
(Fig. 19).
Slide the impact shield (L) in until it reaches you child's torso.
Depending on the angle of the back rest or the size of the child, the impact
shield (L) may already be up against your child's torso without the impact shield
arms (N) being positioned under the arm rests (C). This has no bearing on the
correct function and safety of the child seat (Fig. 20).
Then pull the 3-point vehicle seat belt out until it can reach around your kiddy
child restraint system and engage directly into the vehicle seat belt latch (Fig. 21).
While doing so, ensure that the seat belt tongue engages with an audible 'click' .
Then thread the lap belt into the impact shield guides (M).
Then tighten the lap belt (Fig. 22). In the process, the impact shield must rest
against your child's torso.
Then thread the shoulder belt into the impact shield guides (M) (Fig. 23).
Ensure that the belt lies flatly and is not twisted.
Tighten the shoulder strap (Fig. 24).
28