About The Dvd-Player - AEG DVD 4528 TFT Bedienungsanleitung

English
40
Inputs on the side of the device
Switching on the player (Abb. 1/4)
05-DVD4528TFT_GB.indd 40 05-DVD4528TFT_GB.indd 40
Digital
Connect the Coaxial cable for transmission of digital Audio signals to
your playback device or your amplifi er.
1. Insert the audio plug into the socket on the right-hand side of the
device (Fig. 1/6).
2. Plug the Audio jack into the corresponding socket on your playback
device or your amplifi er.
USB Input (on the right-hand side of the device) (Fig. 1/9)
Insert a USB storage medium into the corresponding socket on the
right-hand side of the device.
Memory Card Slot (on the front of the device) (Fig. 1/22)
Insert an MMC/SD or MS storage card into the card slot on the front of
the device.
Turn on the main switch of the DVD player by moving the „ON/OFF"
switch on the right-hand side of the device to the „ON" position.

About the DVD-Player

With this DVD-Player you can play a vast variety of DVD-formats
➯ Page 33, „Technical data".
However, you must be aware that in many cases DVDs are encrypted
with a so-called "Regional Code". This specifi es for which region in the
world the DVD is intended. As an example, the DVDs marked with regi-
onal code "1" are intended for the USA and Canada. DVDs with regional
code "2" are for use in Europe.
NOTE:
With your DVD-Player you can only play DVDs with regional code "2".
There are both lots of burning and compressing methods as well as
high quality differences in (burned) CDs/DVDs. Moreover, the music
industry has not yet agreed on a fi xed standard for copy protection.
This may, in very isolated cases, result in problems when relaying CDs,
DVDs and MP3 CDs. This is no malfunction of the player.
Furthermore, there may be isolated problems when playing CDs or DVDs
which were created on a PC (e.g. holiday photographs). In case of pro-
blems check the settings of the DVD writing program on your computer.
You should in particular make sure that the DVD has been fi nalized. For
further information on this matter please refer to the operating manual
of your recorder.
30.11.2007 9:50:05 Uhr 30.11.2007 9:50:05 Uhr