Parts List - Perles HSW4186 Bedienungsanleitung

d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of these
devices can reduce dust related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools.
measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power tools
operation. If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
Such preventive safety
Dear Customer,
Thank you for buying a Perles power tool.
Should you have any questions, vagueness or second
thoughts about our products, we recommend you to
contact our experts in Sales and Service Departments,
who will advise you and help you find the right answers to
the set questions. Please, call us on the telephone
number +41 (0) 32 376 01 20.
Perles, Elektrowerkzeuge & Motoren AG. CH-2542
Pieterlen, Buettenbergweg 5.

PARTS LIST

Pos.
1 Reducing gearbox
2 Cover of reducing
gearbox
3 Spindle
4 Pair of toothed
whee
ls
6 Washer
7 Washer
8 Seal
9 Spacer
10 Retaining ring
11 Lead
15 Bearing
16 Nut
17 Washer
18 Flange nut
19 Flange
20 Bearing
21 Screw
22 Screw
23 Screw
24 Washer
30 Motor gerabox
31 Orifice
32 Brush holder
33 Cover
34 Brush (pair)
36 Cup
15
Pos.
37 Screw
38 Bearing
39 Holder
40 Rotor
45 Stator
46 Conductor
47 Conductor
50 Handle
52 Pawl
53 Spring
54 Switch
55 Lead
56 Bridge
57 Screw
60 Pad
61 Guard
64 Support
65 Handle assembly
69 Washer
70 Nut
71 Plate
72 Handle
78 Plate
80 Supply cord, plug
83 Electronic block
84 Line-up terminal
85 Spanner