LR Suprasorb CNP P3 Gebrauchsanweisung Seite 136

Using the power socket on the Suprasorb
supply for charging or operation via the power supply.
PLEASE NOTE
Use the supplied power supply only.
Start by connecting the power supply to the power socket on the Suprasorb
Then connect the power supply to the mains power supply.
Exudate pouch tube
Container system
(container &
exudate pouch)
CNP P3, connect the unit to the mains power
®
Incorrect voltage power supply
Improper operation causes overvoltages to develop in the device which
can then pass to the user.
• Ensure that the power supply is set to a voltage of 100-240 V alternating
current prior to use.
• Only operate the device with the power supply TR15RAM150-E-160E24
input 15 V DC 1 A.
If required, there is an adapter supplied in the case with which the device
can be connected up to the mains power supply in your country.
Device
for generation
of negative pressure
Power cable
Power supply
of Suprasorb CNP P3
Socket
Wound drainage system
Connection of
Suprasorb
therapy unit to patients
and accessories
CNP P3.
®
Patient
CNP P3
®