Removing The Suprasorb ® Cnp P3 From The Bed Mount/Universal Mount; Connection To Wound Drainage System And Power Supply - LR Suprasorb CNP P3 Gebrauchsanweisung

3.7 Removing the Suprasorb
2. The therapy unit can also be removed from the bed mount/universal mount when the latter
is attached to the sides of the patient's bed or anchored on a rail.

3.8 Connection to wound drainage system and power supply

The connection to the wound drainage system can now be affixed to the exudate pouch tube.
This can be done via either the Suprasorb
The connection is established via the single-piece connector on their tube ends.
Three steps for connecting the tube using the single-piece connector: See Section 3.3.
PLEASE NOTE
CNP P3 from the bed mount/universal mount
®
1. To remove the Suprasorb
universal mount, move the green lever to the right and push
the therapy unit gently to the right out of the bed mount.
CNP Drainage Pad or the Suprasorb
®
The application of the wound dressing and the connection to
the therapy unit must only be performed by qualified healthcare
professionals. Further information on the Suprasorb
Suprasorb CNP Deep Drain and Suprasorb
®
found in the instructions for use for the respective product.
CNP P3 from the bed mount/
®
CNP Deep Drain.
®
CNP Drainage Pad,
®
CNP Y Connector can be
®
135