GCE HOSPIQUICK 25 AIR Bedienungsanleitung Seite 3

Before initial use the product shall be kept in its original packaging. GCE
recommends use of the original packaging (including internal sealing bag
and caps) if the product is withdraw from operation (for transport and
storage).
Statutory laws, rules and regulations for medical gases, accident prevention
and environmental protection must be observed.
OPERATING CONDITIONS
-20/+60 °C
10/100%
600/1200 mbar
4. PERSONNEL INSTRUCTIONS
The Medical Devices Directive 93/42/EEC states that product provider
must ensure that all personnel handling the product are provided with the
operating instructions & performance data.
Do not use the product without properly familiarization of the product
and its safe operation as defined in this Instruction for use. Ensure user
is aware of particular information and knowledge required for the gas
in use.
5. PRODUCT DESCRIPTION
Gas from the medical gas
pipeline system entering
through the inlet connector,
then calibrated in the flow
control head and deliver to
the user through the flow
outlet user
Different flows
selected by the flow control
knob on the flow head.
A - INLET QUICK CONNECTOR (QC)
The low pressure regulator is fitted to the medical gas pipeline system
terminal unit or to medical regulator by a gas specific male probe.
connection.
can be
3/35
STORAGE AND TRANSPORT
CONDITIONS
-30/+60 °C
10/100%
600/1200 mbar
A
C
EN
B