Cleaning And Maintenance - Outwell Deep Chill 29 Bedienungsanleitung

6.2 Switch off the cool box
• Empty the cool box.
• Switch off the cool box.
• Pull out the cable from the socket.
If you do not want to use the coo box for a longer period of time.
• Leave the device cover slight open, this will prevent odor build-up.
6.3 Defrost the cooling device
Humidity can form frost in the interior of the cooling device or on the vaporiser, and this will
reduce the cooling capacity of device. Defrost the cooling device in good time to avoid this.
NOTICE! Danger of damage!
Never use hard or pointed tools to remove ice or to loosen objects which have frozen in the cool box.
Process the following step to defrost the cool box
• Take out the contents of the cool box.
• If necessary, place them in another cooling device to keep them cool.
• Switch off the device.
• Leave the cover open.
• Wipe off the defrosted water.

7. CLEANING AND MAINTENANCE

7.1 Replacing the DC plug fuse
• Pull off the adaptor sleeve from the DC plug.
• Unscrew the screw out of the upper half of the housing.
• Carefully raise the upper half of the housing from the lower half.
• Take out the contact pin.
• Replace the detective fuse with a new fuse with the same type and rating
• Re-assemble the plug in the reverse order.
7.2 Cleaning the cooling device
• Occasionally clean the device interior and exterior with a damp cloth.
• Make sure that the air inlet and outlet vents in the device are free of any dust and dirt,
so that heat can be released and the device is not damaged.
WARNING!
Always disconnect the device from the power supply before you clean and service it.
NOTICE! Risk of damage
• Never clean the cool box under running water or in a dish water.
• Do not use abrasive cleaning agents or hard objects during cleaning as these can damage the
Cool box.
8