Herunterladen Inhalt Inhalt Diese Seite drucken

Outwell Deep Chill 29 Bedienungsanleitung Seite 7

Kompressor-kühlbox
Vorschau ausblenden Andere Handbücher für Deep Chill 29:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 11
NOTICE! Danger of damage!
Disconnect the cool box and other consumer units from the battery before you
connect the battery to a quick charging device.
Over-voltage can damage the electronic of the cool box.
For safety reason, the cool box is equipped with an electronic system to prevent polarity
reversal. This protects the device against short-circuiting when connecting to a battery.
5.1 Using the fused DC plug for device connection
NOTICE! Danger of damage!
In order to protect the device, the DC cable supplied includes a fuse inside the plug. Do not remove the fuse
from the DC plug.
Plug the DC cable into the cooling device DC power supply inlet.
Connect the DC cable to the DC power supply outlet.
5.2 Connect to an AC power supply
Plug the AC cable into the cooling device AC power supply inlet.
Connect the AC cable to the AC power supply outlet.
NOTICE! Danger of damage!
Never handle plugs and switches with wet hands or if you are standing on a wet surface.
If you are operating your cool box on board of a boat from a power supply 120V, you must install a
residual current circuit breaker between the 120V AC power supply and the cool box.
6. USING THE COOL BOX
6.1 Switch on the cool box
NOTICE! Danger of overheating!
Always ensure that there is sufficient ventilation so that the heat which is generated during the
operation can dissolve. Ensure that the ventilation slots are not covered. Make sure that the device
is sufficiently far away from walls and other object so that the air can circulate.
Place the cooler on a firm surface.
Make sure that the ventilation slots are not covered and that the heated air can dissipate.
Close the cooling device.
Switch on the cooler.
NOTICE! Danger from excessively low temperature!
Ensure that the only those objects are placed in the cool box that are intended to be cooled at the
selected temperature.
NOTE!
The temperature displayed in the screen is that of the center of the cool box, the surrounding areas can devi-
ate slightly from this temperature.
7

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis