Outwell Deep Chill 29 Bedienungsanleitung Seite 5

• Select temperature display unit: First touch the button "down" without releasing, at the same time use
your another finger to touch the button "set" without releasing, keep your two fingers touching the two
buttons "set" and "down" for about 10 seconds, there will be flashing "°C" or "°F" appearing in the display
screen, release your two fingers from the two buttons "down" and "set". Then touch the button "up" or
"down" to select the temperature unit Celsius or Fahrenheit. The selected temperature unit will appear
and flash in the display screen for a few seconds, and then the display screen will return to display the
current Temperature automatically.
• Cooling temperature setting: touch the button "set" once, then touch the "UP +" and "DOWN -" button
to set the cooling temperature you want. The selected temperature number will flash in the display
screen for a few seconds, and then the display screen will return to display the current temperature
automatically.
4.4 Low voltage protection battery monitor setting:
The cool box is equipped with a 3-level battery monitor which protects your vehicle battery
against excessive discharging when the device is connected to the on-board DC supply.
If the cool box is operated when the vehicle ignition is switched off, the cool box switches off
automatically as soon as the supply voltage falls below a set level. The cooler will switch back on
once the battery has been recharged to the restart voltage level.
NOTICE! Danger of damage!
When switched off by the battery monitor, the battery will no longer be fully charged. Avoid
starting repeatedly or operating without longer charging phases. Ensure that the battery is
recharged.
In "H3" level, the battery monitor responds faster than at the level "H1" and "H2".
Monitor Level
12V Switch-off voltage
12V Restart voltage
24V Switch-off voltage
24V Restart voltage
When the cool box is supplied by the started battery, select the battery monitor level "H3", if the
cooling device is connected to a supply battery, the battery monitor level "H1" will suffice.
• Switch on the cooling device.
• There are 3-level low voltage protection battery monitor setting: H1, H2 and H3.
Touch the button "UP " and "DOWN" at the same time for about five seconds, there will be flashing
"H1" or "H2" or "H3" appear in the display screen, touch the button "UP +" or "DOWN -" to select the
battery monitor level "H1" or "H2" or "H3" to protect your vehicle battery. The selected monitor level
"H1" or "H2" or "H3" will flash in the display screen for a few seconds after setting, the display flashes
several times before it return to the current temperature.
H1 H2
10.3V 10.8V
11.1V 11.8V
21.5V 22.3V
22.7V 23.7V
5
H3
11.3V
12.6V
24.3V
25.7V