Explanation For Symbols And Indications - Jansen HKT 604 ZB Lite Slider Gebrauchs- Und Montageanweisung

2.4 Explanation for symbols and indications

The appliance was produced according to state of the art
technology. Machines nevertheless give rise to risks which
cannot be constructively avoided.
In order to guarantee suffi cient safety for the use, safety
instructions are also given. These instructions are marked
by way of the highlighted texts which follow.
Suffi cient safety in operation will only be guaranteed when
these instructions are observed.
The designated text passages have diff erent meanings:
DANGER
Note indicating an imminent threat which
may result in death or very serious injury.
CAUTION
Note indicating a potentially dangerous situa-
tion which may result in death or very serious
injury.
IMPORTANT
Note indicating a dangerous situation which
may result in minor injury or damage to the
appliance.
PLEASE NOTE
Note to be observed in order to make hand-
ling the appliance easier.
Safety Instructions and Warnings
The following danger symbols are used at some points:
WARNING OF ELECTRICAL ENERGY!
RISK OF FATAL INJURY!
Live components have been installed near
this symbol. Covers bearing this sign may
only be removed by a certifi ed skilled electri-
cian.
CAUTION! HOT SURFACES!
This symbol has been applied to surfaces
which get hot. There is a risk of serious bur-
ning or scalding.
The surfaces may also be hot after the appli-
ance has been switched off .
OBSERVE REGULATIONS FOR HAND-
LING ELECTROSTATICALLY SENSI-
TIVE COMPONENTS AND MODULES
(ESDS).
Electrostatically endangered components
and modules are located behind covers be-
aring the adjacent symbol. Never touch plug
connections, strip conductors or component
pins. Only qualifi ed staff members who are
familiar with ESDs are authorised to carry
out any technical intervention work.
GB
23