GYM form SLIM FOLD Bedienungsanleitung Seite 9

• Anti-static lubricant was applied to the belt at
the factory.
• Lubricant can be applied to the device after
100 hours of use. Apply a special treadmill
lubricant underneath the treadmill belt by
lifting the belt away from the base slightly and
applying the lubricant.
Repositioning the belt:
IMPORTANT: After continuous use, the belt
may shift to one side due to the constant
pressure of the feet. It should be centred again
by adjusting the belt screws (29) with the small
Allen key provided (15). See Picture 5:
1. Switch ON the treadmill and let it run at a
speed of 6 km/h. Use the small Allen key (15).
To shift the belt (4) to the right, tighten the left
screw by giving it 1/4 of a turn in the clockwise
direction. Repeat until the belt is centred.
(Note: if you turn the screw to the left, i.e. anti-
clockwise, the belt will shift to the left.)
2. If the treadmill (4) has shifted to the right. Use
the small Allen key to shift the belt to the right
by tightening the left screw and giving it 1/4 of a
turn in the clockwise direction. Repeat until the
belt is centred. (Note: if you turn the screw anti-
clockwise, the belt will shift to the right.)
Tightening the belt:
1. If the treadmill belt (4) slides during use, it
should be tightened. Switch OFF the treadmill
and unplug it from the power source. Use the
small Allen key (15) to give the left screws
and then the right screws 1/4 of a turn in the
anti-clockwise direction. Switch ON the main
switch and start the treadmill running at 6 km/h.
Walk on the treadmill. If it still slides, repeat the
process until the belt no longer slides.
- If you do not plan to use the device for an
extended period of time, please store it in a
clean, dry place and prevent it from coming into
contact with dust.
- Do not touch the ON/OFF button or the power
cable with wet hands.
- Do not tug on the cable when unplugging
the device. To prevent the cable from being
damaged, do not place heavy objects on top of
it and do not wrap it around the device . Do not
use the device if the cable or the plug do not
make a good connection.
Technical Specifications:
Voltage: 220-240V
Frequency: 50/60 Hz
Power: 500 W
Unfolded Measurements
1358 mm x 610 mm x 1175 mm (L x W x H)
Folded Measurements
460 mm x 610 mm x 1435 mm (L x W x H)
Packaging Measurements
1330 mm x 285 mm x 650 mm (L x W x H)
Gross Weight 28 kg
Net Weight 24.5 kg
Disposal of materials
A symbol of a crossed-out wheeled bin
means you should find out about and
follow local regulations about disposing
of this kind of product.
Do not dispose of this product as you would
other household waste. Dispose of this device
in accordance with the corresponding local
regulations. Electrical and electronic devices
contain hazardous substances that can have
harmful effects on the environment and/or
human health and should be recycled properly.
Quality Warranty:
This product is covered by a warranty against
manufacturing defects subject to the time
periods stipulated by the legislation in force in
each country.
This warranty does not cover damages resulting
from inadequate use, negligent commercial
use, abnormal wear and tear, accidents or
improper handling.
Australia & New Zealand only
This product has the benefit of certain Consumer
Guarantees. These are prescribed by the
Australian Consumer Law & the New Zealand
Consumer Guarantees Act 1993 both of which
provide protection for consumers. There is no
express warranty for this product in Australia or
New Zealand. The above paragraph refers to
other countries.
Made in China
9