Fax Report For Power Failure; Fax Messages; Messages During Transmission; Messages During Reception - Olivetti LINEA OFFICE Kurzanleitung

Fax Report for Power Failure

If a power failure occurs, any messages which have been saved are lost. When the printer is next switched on, an
activity report is printed with the date and time of the power failure, and indicating the presence of any
documents in memory. The correct date and time must be re-entered.

FAX MESSAGES

The printer display normally displays the date and time, and informs the user on the status of the current fax
activities. The messages that are displayed do not impede the normal operation of the printer, and can remain
displayed until the next time the fax module is used.
To remove the message displayed, you can press Cancel ("C") on the fax keypad.

MESSAGES DURING TRANSMISSION

Message Description
TX INTERRUPTED •
TX NOT POSSIBLE •
TX MEMORY FULL •
TX ERROR •

MESSAGES DURING RECEPTION

Message Description
RX INTERRUPTED •
RX ERROR •
MEMORY FULL •
The user has interrupted the transmission in course by pressing the Cancel key.
The scanner is already busy with another operations, for example, from the
computer. Wait until the operation in course on the scanner completes before
scanning the new document to be sent by fax.
The fax memory available is full because too many documents have been received
from the scanner; no more documents can be saved. Send the documents present in
memory by fax, or delete them.
Displayed at the end of a failed fax transmission. Try faxing another document.
The user has interrupted the fax reception in course by pressing the Cancel key.
Displayed at the end of a failed fax reception. Try receiving another document via
fax.
The memory available on the fax is full because many documents have been
received. If this type of error occurs, a generic error code appears on the fax report
Print the documents received that are present in memory, or delete them if not
required.
QUICK REFERENCE GUIDE 29