Configuring The Sliding Rail Assemblies - Dell HT118 Installationsanleitung

Figure 1-3. Marking the Vertical Rails
1
1 marks on vertical rail (2)

Configuring the Sliding Rail Assemblies

The sliding rail assembly has a rotating mounting bracket at each end of the
rail. The position of the bracket determines whether the rail assembly is used
as a RapidRail or a VersaRail. The RapidRail side of the bracket has a hook
and a latch that secure it to the vertical rail. The VersaRail side of the bracket
has three holes and uses screws to attach it to the vertical rail.
NOTE:
The rack kit ships with the slide assemblies in the RapidRails configuration.
12
Rack Installation Guide
Downloaded from www.Manualslib.com manuals search engine