Miele DA 119 Gebrauchs- Und Montageanweisung Seite 39

a Extension piece
b Tower
c Joystick
This is used to operate the fan
settings and the lighting.
d Grease filter
e Ventilation grille
(only for recirculation mode)
f Canopy
g Charcoal filter
(special accessory for recirculation
mode)
h Hob lighting
i Fan power level display
The indicator lights show the level at
which the fan is operating, and also
indicate the number of hours the
appliance has run.
j Run-on function
The lights show the run-on time
selected.
k Grease filter control lamp
The light comes on when the grease
filter has to be cleaned.
l Charcoal filter indicator light
The indicator light for the charcoal
filter comes on when the charcoal
filters need to be replaced.
m Touch control for run-on function
For activating the run-on function.
The fan switches off automatically
after either 5 or 15 minutes.
Downloaded from www.Manualslib.com manuals search engine
Description of the appliance
n Touch control for the grease filter
The touch control is used:
– to reset the operating hours counter
after cleaning the grease filters
(see Cleaning and care).
– to show how long the filters have
been in use (see Operation: filter
operating hours counter).
– to alter the number of hours counted
by the filter operating hours counter
(see Operation: Setting and altering
the grease filter operating hours
counter).
o Touch control for the charcoal filter
The touch control is used:
– to reset the operating hours counter
after replacing the charcoal filters
(see Cleaning and care).
– to show how long the filters have
been in use (see Operation: filter
operating hours counter).
– to alter the number of hours counted
by the filter operating hours counter
(see Operation: Setting and altering
the charcoal filter operating hours
counter).
39