Cleaning And Maintenance - Kasanova K038NN Gebrauchsanweisung

WATER KETTLE
14
9. Remove the plug from the wall socket when you have finished
using the jug kettle.
Overheating safeguard
The jug kettle is fitted with an overheating safeguard. This will switch
off the jug kettle if it is operated without (sufficient) water. Allow the
jug kettle to cool down for at least 10 minutes before using it again.

CLEANING AND MAINTENANCE

• Remove the plug from the wall socket, and allow the appliance to
cool.
• Clean the jug with a damp cloth. Never immerse the appliance in
water. Never put the appliance in a dishwasher. Make sure that the
electrical connections do not become damp.
• If the interior of the jug has become severely discoloured, then the
best way to clean it is with a damp cloth and a little washing soda.
After cleaning, rinse the jug very thoroughly.
ATTENTION
• Never use corrosive or scouring cleaning agents or sharp objects
(such as knives or hard brushes) to clean the appliance.
• Before cleaning, make sure that the appliance is not connected to
the power supply and that it has cooled down.
DESCALING
This appliance is equipped with an integral heating element, and
consequently limescale will not be formed. Consequently you do not
need to descaled the appliance.
However, if you nevertheless do wish to descale the appliance:
1. Remove the plug from the wall socket, and allow the appliance to
cool.
2. The jug kettle is fitted with a descaling filter. This filter must be
removed for cleaning.
3. Fill the jug with a vinegar solution to the MAX level, and bring to
the boil.
4. Leave the jug with the vinegar solution to stand for a couple of
hours.
5. Empty the jug, fill with clean water to the MAX level, and bring to
the boil. Empty the jug. Repeat this process twice.
• Never use ammonia or other products to descale the appliance.
These can be injurious to your health. Use solely a vinegar solution, or
special descaling agents available from retailers.