Cleaning And Storage - Kasanova YIE000002-3 Bedienungsanleitung

KETTLE
12
FOR THE FIRST USE
Clean the outside and inside of the machine cabinet with a damp cloth and
wipe dry.
Before using the machine for the first time it's better to rinse the inside kettle.
1.Fill half of the tank of fresh water. (without addendum of any product).
2.Put the switch on " ON "position. The light goes on, showing that water
begins heating up.
3.When boiling, the apparatus goes out automatically
4.Raise the kettle with circumspection and empty water in a sink by watching
out not to splash (risk of scald).
5.The appliance is ready to be used.
USE
1.Unroll the power cord completely.
2.Connect the appliance in a correct socket-outlet.
3.Fill the kettle with fresh water (Do not overfill ! Use the water MAX level
indicator.)
4.Place the kettle on the base.
5.Switch the machine to position "1". The control lamp on the kettle shows that
the water is heating.
6.When boiling the machine switches off automatically.
7.Take the kettle and pour gently the water in a sink. Take care to ovoid any
burn.

CLEANING AND STORAGE

1. Make sure the appliance is unplugged from the supply socket and fully
cooled down before cleaning.
2. To clean the exterior surfaces, slightly wipe over with a soft damp cloth and
dry thoroughly.
3. To clean the inner walls of the kettle, use a soft damp cloth or a soft brush to
remove the residues.
Note: Never use abrasive product
4. Never immerse the jug kettle or its base in water.
5. Dish washer forbidden.
6. The appliance has to be descaled regularly to ensure optimum
performance. The frequency depends on the water hardness and the boiling
frequency.
• If you begin to notice the increase of the noise during boiling, or if the
kettle switches off before water being boiled, this indicates that descaling is