RHOSS Mini-Y Serie Gebrauchsanweisung Seite 43

Once the Econom y mode has been s et, it is possible to define one of
the three Set-poi nt regulation c ur ves for the AdaptiveFunction Plu s
Econom y func tion i n Summ er mode.
It is possible to c hoos e between two types of efficienc y: LOW , MED
(default) and HIGH.
Label Features of the regulation curve
Use in buildings with very unbal anced loads.
Efficienc y higher than the standard.
Inter mediate comfort and efficienc y (default).
Use in buildings with very homogeneous l oads.
High efficienc y.
Press the MODE key until the following mas k is dis played:
MODE
ALARM
Prg
ON/OFF
Press the Prg key for 2 seconds .
The dis play will show the default val ue M
Using the MODE (UP) and ON/OFF (DOWN) keys, it is possible to
select the r egulation cur ve (L, M, H) in W inter mode.
Press the MODE and ON/OFF keys at the s ame ti me to memorise the
val ue s et.
The three adj ustment cur ves correspond to thr ee different l aws of
variation of the Set-point based on the l oad, in order to modify the
degree of comfort which can be attained in the room and the efficienc y
of the mac hine.
AdaptiveFunction Plu s in Summer mode
y
H
M
L
Precision
S
x Load percentage (%)
y Set-point (°C).
S Value of Set-point set by user
Use in buildings with very unbal anced loads.
L
Efficienc y higher than the standard.
M Inter mediate comfort and efficienc y (default).
Use in buildings with very homogeneous l oads.
H
High efficienc y.
Selection of summer mode Economy
functi on efficienc y
MODE
ALARM
Prg
ON/OFF
100%
I.1.19 AdaptiveFunction Plus Economy in Radiating
Systems Mode.
It is possible to enable the Econom y functi on dedicated to the
applications for radiant s ystems. T his function is onl y availabl e in
W inter mode.
Press the Prg key to access it.
Press the MODE key until the following mas k is dis played:
Press the Prg key to access it.
Modify the Y parameter ( yes) to enable the function.
Press the MODE and ON/OFF keys at the s ame ti me to memorise the
val ue s et.
The Ec onomy function is not available in the following c ases:
- compens ation of the Set-point on the basis of the outdoor air
temperature;
- double Set-point;
- Set-poi nt from exter nal signal (shifti ng/offs et Set-point);
- Set-poi nt from time periods;
- integrative resistance regulated from the outdoor air temperature.
x
43
IMPORTANT !
If the Radiating System s function is en abled ( y), the
AdaptiveFunction Plu s Econom y in Summer mode
is forced into Precision operation.
MODE
ON/OFF
MODE
Enabling of Economy function for
ALARM
radiant s ystems
Prg
ON/OFF
MODE
ON/OFF
CONTROL PANELL PST
ALARM
Prg
ALARM
Prg