Operation - Scantool SC 125V Gebrauchsanweisung

2-1. Operation

Safety rules for stationary power tools
Follow them to achieve best results and full benefit from your new machine
The very good craftsman respects the tools with
which he works. He knows they represent years
of constantly improved design. He also knows
that they are dangerous if misused.
This is the theme of a new safe-use program for
stationary power tools. The safety rules are
based on approved practices in industrial and
home shops.
2. Keep guard in place
and in working order.
3. Ground all tools. If tool is equipped
with three-prong plug, it should be
plugged into a three-hole electrical
receptacle. If an adapter is used to
accomodate a two-prong receptacle, the
adapter wire must be attached to a
known ground. Never remove the third
prong.
5. Keep work area clean.
Cluttered areas and benches
invite accidents.
7. Keep children away. All
visitors should be kept in a
safe distance from work
area.
20
8. Make workshop kidproof with
padlocks, master switches, or by
removing starter keys.
1. Know your power tool. Read
the owner's manual carefully.
Learn its applications and
limitations, as well as the
specific potential hazards
peculiar to this tool.
4. Remove adjusting keys
and wrenches. Form habit of
checking to see that keys
and adjusting wrenches is
removed before turning it on.
6. Avoid dangerous
environment. Don't use
power tools in damp or wet
locations or expose them to
rain. Keep your work area
well lighted.