Grounding Instructions - Scantool SC 125V Gebrauchsanweisung

2-2. Instructions
Cutting instructions
This tool is intended to cut materials such as steel, iron, copper, etc. NEVER USE THIS
TOOL TO CUT WOOD AND EXPLOSIVE METAL MATERIAL.
USE A CORRECT PLUG
As different countries use different plugs, the user has to install the right plug approved in
your country.

Grounding instructions

In the event of a malfunction or breakdown, Grounding provides a path of least resistance for
electric current to reduce the risk of an electric shock. This tool is equipped with an electric
cord having, an equipment-grounding conductor, and a grounding plug. The plug must be
inserted into a matching outlet that is properly installed and grounded in accordance with all
local codes and ordinances.
Do not modify the plug provided. If it does not fit the outlet, have the proper plug installed
by a qualified electrician. Improper connection of the Equipment-grounding conductor can
result in a risk of an electric shock. The conductor with Insulation having an outer surface
that is green, with or without yellow stripes is the equipment-grounding conductor. If repair
or replacement of the electric cord or plug is necessary; do not connect the equipment-
grounding conductor to a live Terminal. Check with a qualified electrician or service personnel
if the grounding instructions are not completely understood, or if in doubt as to whether the
tool is properly grounded.
22