Adjustments; Adjusting The Cutting Angle - Scantool SC 125V Gebrauchsanweisung

2-6. Adjustments

Adjusting the length stop
If you have to cut several pieces all in the same
length, use the supplied length stop
in order to avoid repeating the measurements.
Adjusting the blade guide
This machine is provided with a sliding guide
Fig 18
(I of Fig 7) with built-in protection, which
guides the part of the blade necessary to make the cut,
and at the same time protects the part of the blade when
not in use.
To do this simply loosen the locking handle (J of Fig 7)
and slide the blade guide (I of Fig 7) to bring it closer to
or farther away from the piece that has to be cut

Adjusting the cutting angle

This band saw can cut angles varying from 0̊ to 60̊ .
loosen the locking handle (K of Fig 8),
and turn the bow-saw (L of Fig 8),
Fig 19
until the scale to the desired angle is met, and tighten the locking handle.
27