Maintenance; Specifications; Noise Level - Scantool SC 125V Gebrauchsanweisung

2-3. Maintenance

Be careful: Before every cleaning or maintenance operation, ensure that the plug is not
in the electric supply socket.
Keep the machine free from residue by means of a vacuum cleaner or a brush. Remember
to clean the blade guides.
Keep the band saw in good condition: If it is not to be used for a long time or period, put it
away in its original packing in a damp-free place. In these cases it is advisable to loosen the
blade to make sure not to keep it under unnecessary tension.

2-4. Specifications

Item
Voltage
Motor
Cutting Capacity 90"
Cutting Capacity 45"
Cutting Capacity 60"
Fig 14
24
Specifications
230 V
(1010W)
Circular bar: 125mm
rectangular bar: 130
x125mm.
Circular bar: 76mm
rectangular bar: 76 x
76mm
Circular bar: 50mm
rectangular bar: 50 x
50mm
Item
Blade size
Bow-Saw
Blade speed
Packing

NOISE LEVEL

Specifications
13 x 0.65 x
1440mm
Aluminum
30 ~ 80 MPM
724mm x 375mm
x 446mm
The noise level for
the tool is about
60 dB(A)