AVIRE DCP Installationsanleitung Seite 7

OPTION 2
If super settings are not used, then APN settings need to be set up manually:
These parameters must be configured by sending an SMS to the SIM card number.
Examples for various regional providers are shown below:
Carrier
Vodafone UK
DeutscheTelekom
Orange France
P063
Type Transparent Gateway
Other APN settings are available on the web and can be easily found online. If an APN
is incorrect for the provider or is not set up correctly, the DCP will not check into the
Avire HUB.
Important Note: The default PIN code for DCP is always 1234.
Example of an SMS for single SIM card device (for example if the SIM card is from
Vodafone):
Pin1234,P060 wap.vodafone.co.uk,P061 wap,P062 wap,P063 1
If either APN username and/or APN password are (blank) (DeutscheTelekom example)
and the DCP is configured to be used with the Avire Hub, then the text message will be:
Pin1234,P060 (blank),P063 1
If everything is configured correctly, you will receive a text within a few minutes:
Command
P060 (P zero six zero)
P061 (P zero six one)
P062 (P zero six two)
P063 (P zero six three)
P060
wap.vodafone.co.uk
Telekom
Orange.fr
0
Description
APN address
APN username
APN password
Type of connection
P061
wap
(blank)
orange
1 2
Avire Hub P100
P062
wap
(blank)
orange
3
P100 + Avire Hub
7