AVIRE DCP Installationsanleitung Seite 6

Digit 1
Continent
Digit 2 & 4 1
Country Spain
0
default
1
AvireSim
2
Telefonica
3
Orange
4
Vodafone
5
6
7
8
Telit
9
Digit 3
Type Transparent Gateway
Transparent Gateway
Avire Hub
P100
P100 + Hub
*Avire Ecosystem devices only
If your SIM's APN details are not listed on the previous tables, you will need to obtain
this information and then manually programme the details using Parameters 60 and 61.
Further details on these settings can be found using this link.
0 1-6
Default Europe
2 3
Portugal Italy
default default
AvireSim AvireSim
MEO Wind
NOS TIM
Vodafone Vodafone
Iliad
tre(3)
Telit Telit
0
Avire Hub
Enables DCP to provide data/cellular connection to a
device which is connected to it. This setting is often used
when connecting the DCP to a non-avire PSTN phone or
to a lift controller.
Avire Hub setting is used when the intention is to monitor
your *devices using the Avire Hub
P100 setting allows connection to devices utilising the
P100 protocol without connection to the Avire Hub
P100 + Hub allows connection to devices utilising P100
protocol and monitoring of devices through the Avire Hub
go.avire-global.com/DCP
7 8
Americas Australasia
4 5
UK Germany
default default
AvireSim AvireSim
O2 Telekom DE
EE ABD
Vodafone Vodafone DE
3 O2 DE
Virgin BASE
1P Swisscom
BT A1
GiffGaff tmobileAT
1 2
P100
0
6
France
default
AvireSim
Orange
SFR
Bouygues Telecom
Free Mobile
Telit
3
P100 + Avire Hub
6