Sleep Mode; Set The Timer; Set The Humidity Level - Philips AC4080 Benutzerhandbuch

Manual
You can mannually select the desired
fan speed.
Press the fan speed button
•
or more times to select the desired
fan speed ( or
Note
In Manual mode, when the air quality
•
reaches the target (air purification only
mode), or when the air quality and
humidity reach the target simultaneously
(combi mode), the appliance will
continue to work with the selected fan
speed.
Tip
If the air quality light is in blue, this
•
means the air quality is good, and you
can select a lower fan speed. On the
other hand, if the air quality light turns
red or purple, this means the air quality
is bad or fair. You can select a higher fan
speed to clean the air quickly.

Sleep mode

In sleep mode, the appliance operates
very quietly.
Press the fan speed button
•
select the sleep mode (fig w).
» The sleep indicator lights up.
To change to another fan speed, press
the fan speed button
Note
When the appliance switches to sleep
•
mode, the indicators goes out after
1 minute, and the appliance keeps
working.
once
) (fig u).
to
.

Set the timer

With the timer function, you can let the
appliance operate for a set number of
hours. When the set time has elapsed,
the appliance automatically switches
off.
1
Press the timer button
the timer (fig x).
» The timer light ( ,
on.
2
Press the timer button
to choose the number of hours you
want the appliance to operate. The
corresponding timer light goes on.
To deactivate the timer function, press
the timer button repeatedly until the
timer light (
, or

Set the humidity level

Note
Make sure that the water tank is filled
•
with water when you want to use
the humidification function (refer to
the chapter "Getting started", section
"Prepare for humidification").
Press the humidity button
•
or more times to set the desired
air humidity to 40%, 50% or 60%
(fig y).
» The corresponding humidity light
(40%, 50% or 60%) starts to flash.
» When the appliance reaches
the target humidity level, the
humidity level indicator remains
on.
Note
• If you want to increase the humidity
level in shorter time, you can select a
higher fan speed.
to activate
or ) goes
repeatedly
) goes out.
once
EN 9