Change The Fan Speed; Manual; Sleep Mode; Set The Timer - Philips AC4012 Benutzerhandbuch

1
Press the button and
simultaneously put the power plug
in the power socket.
» The purifier beeps twice and
one of the
lights ( , , or )
goes on to show the current
sensitivity level of the air quality
sensor.
Timer light Sensitivity level
Extra sensitive
Sensitive
Standard
2
Press the button to adjust the
sensitivity level of the air quality
sensor (fig k).
» One of the
goes on to show the preferred
sensitivity level of the air quality
sensor.
3
Press the button to switch off
the purifier.
Note
• When you change the sensitivity, the
purifier automatically starts operating
at the set sensitivity level whenever you
switch on the purifier.

Change the fan speed

Manual

You can select the desired fan speed.
1
Press the button to switch on the
purifier (fig i).
2
Press the button once or more
times to select the fan speed you
(fig l).
need: , , or
lights ( , , or )
Tip
• If the air quality light is in blue color, this
means the air quality is good, and you
can select a lower fan speed.

Sleep mode

In sleep mode, the air filter operates
very quietly while all lights are dimmed
for your undisturbed sleep.
1
Press the button to switch on the
purifier (fig i).
2
Press the button to select sleep
mode.
» The light goes on (fig m).
To change to another fan speed, press
the button.

Set the timer

With the timer function, you can let
the purifier operate for a set number of
hours. When the set time has elapsed,
the purifier automatically switches off.
1
Press the button to switch on the
purifier (fig i).
2
Press the button to activate the
timer (fig k).
» The timer light ( , , or ) goes
on.
3
Press the button repeatedly to
choose the number of hours you
want the purifier to operate.
To deactivate the timer function, press
the button repeatedly until the timer
light ( , , or ) is out.
EN
7