Computer Operation; Functional Button; Functions And Operations - Fuel HT 200 Benutzerhandbuch

COMPUTER OPERATION

FUNCTIONAL BUTTON

MODE – Press to switch between different functions.
– Hold down for 6 seconds to reset all data.

FUNCTIONS AND OPERATIONS

1. SCAN: Press MODE button until "▼" appears at SCAN position, monitor will rotate through
the following functions: speed, distance, time, calorie, ODO and pulse - each display will be
shown for 4 seconds.
2. TIME: Shows your elapsed workout time (minutes:seconds) up to 99:59.
3. SPEED: Displays current speed. The maximum value is 999.9 km/h
4. DISTANCE: Shows the distance from exercise start. The maximum value is 99.99 km.
5. CALORIE: Shows the calories burned (approximate value only, not suitable for therapeutic
use). The maximum value is 999.9 kcal.
6. ODOMETER: Monitor will display the total accumulated exercise distance of the device. The
maximum value is 999.9 km.
7. PULSE RATE: Press MODE button until "▼" appears at PULSE position.
Before measuring your pulse rate, place the palms of your hands on both contact sensors.
The monitor will show your current heartbeat-rate in beats per minute (BPM) after approx. 6~7
seconds.
Remark: The pulse measurement value cannot be used as base of a medical treatment.
29