Renkforce Android Quad Core TV Box Bedienungsanleitung Seite 36

• Never connect or disconnect power adaptors if your hands are wet.
• Never unplug the power adaptor from the mains socket by pulling on the
cable; always use the grips on the plug.
• When setting up the product, make sure that the cable is not pinched,
kinked or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in
them. This poses a risk of injury.
• For safety reasons, disconnect the power adaptor from the mains socket
during storms.
• Condensation can occur if the product is brought from a cold room into a
warm one (e.g. during transportation).
• For this reason, let the product reach room temperature before connecting
it to the power supply. This may take several hours. Moisture on the power
adapter may result in a fatal electric shock!
• Do not touch the power adapter if it is damaged, as there is a risk of a fatal
electric shock! Begin by fully disconnecting the mains voltage for the mains
socket to which the power adapter is connected (e.g. turn off corresponding
circuit breaker or unscrew fuse, then turn off the corresponding residual
current circuit breaker). Then remove the power adapter from the mains
socket and take the product to a specialist repair centre.
• In industrial facilities, the accident prevention regulations for electrical
equipment and facilities issued by the Industrial Employers' Liability
Association must be adhered to.
• In schools, educational facilities, hobby and DIY workshops, the product
is to be operated under the responsible supervision of qualified personnel.
• If the product is not going to be used for an extended period of time (e.g.
storage), disconnect it from the mains by removing the power adapter from
the mains socket.
• The product becomes warm during use. For this reason, never cover it
during operation.
• Never pour any liquids over electrical devices or put objects filled with liquid
right next to the device. If liquid or an object enters the interior of the device
nevertheless, first power down the respective socket (e.g. switch off circuit
breaker) and then pull the mains plug from the mains socket. Do not operate
the product anymore afterwards, but take it to a specialist workshop.
36