Maintenance; Error Codes - Active Era BS-06 Bedienungsanleitung

RECALIBRATING
If the smart scales have been moved or flipped upside down they must be
recalibrated to ensure accurate measurements.
To recalibrate the smart scales:
1. Place the smart scales on a dry, solid, and flat surface.
2. Step onto the smart scales.
3. 'C' will show on the display indicating that the scales are calibrating.
4. Step off the smart scales.
5. 0.00 will show on the display indicating that the scales are calibrated.
CLEANING
Use a soft, dry or dampened cloth to clean away any dust, or debris from the
exterior surface of the smart scales.

MAINTENANCE

The smart scales require little maintenance. Do not try to fix them by yourself.
Refer them to a qualified service personnel if assistance is required.
STORAGE
For long-term storage, cover the smart scales with a waterproof covering and
store horizontally in a safe, dry place, out of the reach of children.

ERROR CODES

ERROR CODE CAUSE SOLUTION
Lo Battery power low Charge battery.
Step off smart scales to
Smart scales are
Err avoid damaging the high
overloaded.
precision sensors.
Read the recalibration
C Smart scales are calibrating.
section.
11 | English