Introduction; Product Features - EuroLite LED TSL-250 Scan COB Bedienungsanleitung

LED TSL-250 Scan COB
DANGER! Electric shock caused by short-circuit
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric
shock when touching the wires. Never open the housing. Keep the device away from rain and
moisture.
Please read these instructions carefully before using the product. They contain important
information for the correct use of the product.
Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet

INTRODUCTION

Thank you for having chosen one of our products. If you follow the instructions given in this manual, we are
sure that you will enjoy this device for a long period of time.

Product features

Handy scanner with 30 W LED, gobo and color wheel
• Equipped with a white 30 W COB LED
• DMX-controlled operation or stand-alone operation with Master/Slave function
• Internal programs
• Sound-controlled via built-in microphone
• Adjustable microphone sensitivity via Control Board
• 7 brilliant, dichroic colors plus white
• Rainbow effect with adjustable speed
• Gobo-wheel with 7 rotating gobos plus open
• With gobo-shake function
• Slot-in gobo-system for exchanging gobos without tools
• Strobe effect with 2-18 flashes per second
• Manual focus
• Electronic dimmer
• Fan-cooled
• Small and portable
• Lightbeam with 9° radiation angle
• Supports QuickDMX - the wireless DMX system from Eurolite
• Built-in phantom-powered USB port for QuickDMX receivers (accessories)
• Control board with LCD and four operating buttons for adjusting the DMX starting address, PAN/TILT
reverse
• Switch-mode power supply for operation between 100 and 240 volts
• Additional rubber feet when the device shall be positioned on the floor
USER MANUAL
16/28 127079.docx, Version 1.1