Westinghouse WKSO706 Bedienungsanweisungen Seite 7

BLENDING WITH A PRESET PROGRAM
1. Remove the jug from the power base.
2. Cut ingredients into small pieces not exceeding
2cm.
3. Measure ingredients according to the recipe using
the small measuring cup.
4. Add the prepared ingredients to the jug.
5. Add fresh water, chicken or vegetable broth
according to the recipe. To prevent spillages, do
not exceed the 1400mL/48oz marking if choosing
a hot preset program, or the 1750mL/56oz MAX
marking if choosing a cold preset program.
6. To close the lid, place the lid firmly on the jug (see
picture) and twist clockwise until the handle of
the lid is aligned with the handle of the jug. Insert
the feed cap into the lid and lock it into place.
NOTE: Ensure the lid is properly locked into place. The blender is fitted with a
safety feature and will not operate if the lid is not properly closed.
WKSO706_Power Blender_5L_IB.indd 7
EN
7
19/11/2019 12:24:11