Troubleshooting - Westinghouse WKSO706 Bedienungsanweisungen

TROUBLESHOOTING

Problem
The power
indicator/LED
display does not
turn on.
The power
indicator/LED
display is on but
the blender is not
working.
One of the
buttons does not
respond.
The food cannot
be blended.
The food sticks to
the bottom.
E1
WKSO706_Power Blender_5L_IB.indd 11
Possible Cause
The power plug is not
properly connected to the
socket.
The power cord is
damaged.
The START button was not
pressed after selecting the
preset program or function.
The blender system
crashed due to a short
power outage or short
power disconnection.
There is too much water in
the jug.
The power voltage is too
low.
The cooking plate inside
the jug is not clean.
The wrong hot/cold
program was selected.
The food pieces are too
large.
There is too much food or
liquid in the jug.
The blender crashed.
There is water on the
coupler surface or bottom
of the jug.
Solution
Ensure the plug is properly
inserted into the mains socket.
Inspect the power cord for signs
of damage.
Press the START button after
selecting the preset program or
function.
Unplug the blender from the
power socket for 3 minutes
to reset the system. Plug the
blender and try again.
Reduce the amount of water
in the jug, or blend the food
with a small amount of water
before adding the remaining
ingredients.
Use a household voltage
stabilizer.
Unplug the blender from the
power socket and remove the
jug. Clean the interior of the jug
thoroughly and try again (see
CLEANING AND CARE).
Select the correct hot/cold
preset program.
Unplug the blender from the
power socket. Ladle out the
food pieces from the jug, cut
into 2cm pieces (or smaller) and
return to the jug.
Unplug the blender from the
power socket. Reduce the
amount of solid and/or liquid
ingredients in the jug.
Unplug the blender. Clean and
wipe dry the bottom of the jug
and the surface of the power
base.
EN
11
19/11/2019 12:24:11