Toro TimeCutter MX 4275T Bedienungsanleitung Seite 20

6. Locate the 2 bolts in loose parts and use the
existing locknuts to install these fasteners into
the holes used for the welded posts
to prevent flying debris.
Note:
Install the bolt upward, through the
underside of the deck and use an existing
locknut to secure from the topside.
7. Install the mower deck; refer to
Mower Deck (page
Machines with 127 cm (50-inch)
Mower Decks
1. Park the machine on a level surface, disengage
the blade-control switch, and move the
motion-control levers outward to the P
position.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove the mower deck; refer to
Mower Deck (page
4. Remove the 3 locknuts (5/16 inch) from the
welded posts of the right baffle
1. Locknut—5/16 inch (4)
2. Right baffle
(Figure
Installing the
51).
Removing the
50).
(Figure
Figure 13
3. Carriage bolt—5/16 x 3/4
inch
4. Welded post (3)
5. Remove the 2 carriage bolts and 2 locknuts
securing the right baffle to the deck and remove
12) the baffle
6. Locate the 3 bolts in loose parts and use the
existing locknuts and install these fasteners into
the holes used for the welded posts
to prevent flying debris.
Note:
underside of the deck and use an existing
locknut to secure from the topside.
7. Remove the 2 locknuts (5/16 inch) from the
welded posts of the left baffle
ARK
13).
1. Locknut—5/16 inch (3)
2. Left baffle
8. Remove the carriage bolt and locknut securing
the left baffle to the deck and remove the baffle
(Figure
9. Locate the 2 bolts in loose parts and use the
existing locknuts and install these fasteners into
the holes shown in
to prevent flying debris.
Note:
g297022
underside of the deck and use an existing
locknut to secure from the topside.
10. Remove the nut from the grass deflector rod
under the mower deck
18
(Figure 13).
Install the bolt upward, through the
Figure 14
3. Welded post (2)
4. Carriage bolt—5/16 x 3/4
inch
14).
Figure 14 on the mower deck
Install the bolt upward, through the
(Figure
(Figure 13)
(Figure 14).
g297021
15).