Function Keys - TFA 30.3045.IT Betriebsanleitung

displayed user may proceed to the next step.
3. After the batteries are inserted, the wireless thermo-
hygrometer will start receiving data signal from the
transmitter. The outdoor temperature and humidity data
should then be displayed on the wireless thermo-
hygrometer. If this does not happen after 2 minutes, the
batteries will need to be removed from both units and
reset from step 1.
4. In order to ensure sufficient 868 MHz transmission
however, the distance between the wireless thermo-
hygrometer and the transmitter should not be more than
100 meters (see notes on "Positioning" and "868 MHz
Reception").
Note:
In the event of changing batteries of the units, ensure the
batteries do not spring free from the contacts. Always
wait at least 1 minute after removing the batteries before
reinserting, otherwise start up and transmission problems
may occur.

FUNCTION KEYS:

Wireless thermo-hygrometer:
The wireless thermo-hygrometer has 3 easy to use function
keys: 1 key on the front, and 2 keys on the back.
ºC key
MIN/MAX key: Press to view the MIN/MAX indoor and outdoor
ºC key:
temperature and humidity records.
Press and hold for 3 seconds to reset the all
MIN/MAX temperature and humidity records.
Display temperature unit in degree Celsius
(ºC).
19
MIN/MAX key
ºF key