Troubleshooting - TFA 30.3034 Bedienungsanleitung

TFA_No_30.3034.10_Anl_09_16
RATIO
– Wireless thermometer
8. Additional transmitters
• If you like to connect additional remote sensors (max. 3), repeat
the installation procedure for all extra sensors. The wireless
thermometer will number the sensors in the order of set-up
automatically.
• If you have installed more than one transmitter, press the RESET/
CH/+ button to change between the outdoor transmitters. Display
for channel 1 , for channel 2
9. Positioning of display unit and transmitter
• Choose a shady and dry position for the transmitter. (Direct sun-
shine falsifies the measurement and continuous humidity strains
the electronic components needlessly).
• Place the display unit at the final position. Avoid the vicinity of
any interfering field like computer monitors or TV sets and solid
metal objects.
• Check the transmission of the signal from the transmitter to the
display unit (transmission range 100 m free field, within ferro-
concrete rooms, especially with metal parts, the received signal
is naturally weakened).
• If necessary choose another position for transmitter and/or dis-
play unit.
• Use the bracket stand for mounting or standing when the signal
is received successfully.
10. Care and maintenance
• Clean the instruments with a soft damp cloth. Do not use sol-
vents or scouring agents.
• Remove the batteries if you do not use the products for a
long period of time.
• Keep the instruments in a dry place.
10.1 Battery replacement
• When the batteries are used up, the low battery indicator
appears on the display (RX=base station, TX = transmitter).
• Please note: When the batteries are changed, the contact
between transmitter and receiver must be restored – so
always insert new batteries into both units or start a manual
transmitter search.
16
27.09.2016 17:35 Uhr Seite 9
or for channel 3 .
RATIO
– Wireless thermometer

11. Troubleshooting

Problems Solution
➜ Ensure batteries polarities are
No indication
on the basic station correct
➜ Change the batteries
➜ Start the transmitter search manu-
No transmitter reception
Display "---" ally according to the manual
➜ Check batteries of external trans-
mitter (do not use rechargeable
batteries!)
➜ Restart the transmitter and the dis-
play unit according to the manual
➜ Choose another place for the
transmitter and/or the basic unit
➜ Reduce the distance between the
transmitter and the basic unit
➜ Check if there is any source of
interference
➜ Change the batteries
Incorrect indication
12. Waste disposal
This product has been manufactured using high-grade materials
and components which can be recycled and reused.
Never dispose of empty batteries and rechargeable
batteries in household waste.
As a consumer, you are legally required to take
them to your retail store or to appropriate collec-
tion sites depending on national or local regulations
in order to protect the environment.
The symbols for the heavy metals contained are:
Cd=cadmium, Hg=mercury, Pb=lead
This instrument is labeled in accordance with the EU
Waste Electrical and Electronic Equipment Directive
(WEEE).
17