ASROCK B360M-HDV Bedienungsanleitung Seite 22

Chassis Intrusion and
Speaker Header
(7-pin SPK_CI1)
(see p.1, No. 16)
Serial ATA3 Connectors
(SATA3_0:
see p.1, No. 12)
(SATA3_1:
see p.1, No. 13)
(SATA3_2:
see p.1, No. 9)
(SATA3_3:
see p.1, No. 10)
(SATA3_4:
see p.1, No. 8)
(SATA3_5:
see p.1, No. 7)
USB 2.0 Headers
(9-pin USB_7_8)
(see p.1, No. 17)
(9-pin USB_13_14)
(see p.1, No. 18)
USB 3.1 Gen1 Header
(19-pin USB_11_12)
(see p.1, No. 6)
20
SPEAKER
DUMMY
DUMMY
+5V
1
SIGNAL
GND
DUMMY
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
Vbus Vbus
Vbus IntA_P3_SSRX-
IntA_P2_SSRX- IntA_P3_SSRX+
IntA_P2_SSRX+ GND
IntA_P3_SSTX-
GND
IntA_P2_SSTX-
IntA_P3_SSTX+
IntA_P2_SSTX+ GND
GND IntA_P3_D-
IntA_P2_D- IntA_P3_D+
IntA_P2_D+ ID
1
Please connect the
chassis power LED and
the chassis speaker to this
header.
These six SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* If M2_1 is occupied by
a SATA-type M.2 device,
SATA3_3 will be disabled.
There are two USB
2.0 headers on this
motherboard. Each USB
2.0 header can support
two ports.
There is one header on
this motherboard. This
USB 3.1 Gen1 header can
support two ports.