Other Built-In Functions - Citizen Systems CT-S251 Benutzerhandbuch

2.3 Other Built-in Functions

 Buzzer
Buzzes when errors occur or when operations or command operations are
performed.
 User memory
You can save user-defined logo and character data in this memory. Data remains
stored in this memory even if the printer is turned off. For information on how to
save data, refer to the Command Reference.
 Memory switch
Setting of various kinds of functions can be stored in memory. Settings remain
stored in the memory even if the printer is turned off.
 USB-linked power OFF (When MSW6-3 of memory switch is set to ON)
When the printer is connected to PC by USB, the printer becomes the state of USB-
linked power OFF after 3 seconds when PC power off or USB connection lost.
This mode is canceled when the PC is turned back on or when a USB connection is
established.
CAUTION
 Since the POWER LED is unlit when the state of USB-linked power OFF, it cannot be identi-
fied from the power OFF.
 Pressing the POWER button while the state of USB-linked power OFF turns on power nor-
mally.
 Paper saving functions
Memory switches MSW8-3 through MSW8-4 can be used to configure the settings
below, which save paper.
Ÿ Top margin suppression
The printer back feeds the paper before printing which reduces the blank space
at the top edge of the paper.
The back feed amount can be specified.
Ÿ Line gap reduce
Automatically compresses the linefeed amount between lines. The compression
ratio can be specified.
Refer to 4.5 Error Indications
22
— —