Explanation Of Printer Parts; Printer Appearance - Citizen Systems CT-S251 Benutzerhandbuch

2. EXPLANATION OF PRINTER PARTS

2.1 Printer Appearance

Names of parts
1. Paper cover
Open to load paper.
Also open to clear a cutter error.
* The paper cover cannot be used for manual cutting.
2. Cover open lever
Use to open the paper cover.
3. BEZEL LED (Blue)
Flashes while data is being received.
Settings can be configured so this LED lights or flashes by user command.
4. POWER button
Hold down two or three seconds to switch power on or off.
5. FEED button
Press this button to feed paper.
In case of a cutter error, press the FEED button with the paper cover closed after
removing the cause.
The printer enters the mode for setting memory switches and running self test.
1
2
3
4
5
6
Refer to 5.3 Manual Setting of Memory Switches
—
Refer to 4.2 Clearing a Cutter Error
19
—
7
Refer to 4.3 Self Test