Citizen Systems CT-S251 Benutzerhandbuch Seite 178

Schalter-Nr.
MSW6-1
MSW6-2
MSW6-3
MSW6-4
MSW6-5
MSW6-6
MSW6-7
MSW6-8
Schalter-Nr. Funktion
MSW7-1 Baud Rate
MSW7-2 Data Length
MSW7-3 Stop Bit
MSW7-4 Parity
MSW7-5 Flow Control
MSW7-6 DMA Control
MSW7-7 VCom Protocol
MSW8-1 Print Width
MSW8-3 Top Margin
MSW8-4 Line Gap Reduce
MSW8-5 Reduced Char V/H
MSW8-6 Auto Side Shift
MSW8-7 Liner Free Mode
MSW9-1 Code Page
MSW9-2 Int'Char Set
MSW9-3 Kanji
MSW9-4 JIS/Shift JIS
MSW10-1 Print Density
MSW10-2 Print Speed
MSW10-4 Old Command
MSW10-5 Buzzer Event
MSW10-6 Buzzer Sound
Funktion
Act. For Driver
Character Space
USB Power Save
Reserved
Reserved
Reserved
Reserved
Reserved
Voreinstel-
lung
9600 bps 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,
38400 bps, 57600 bps, 115200 bps
8bits 7bits, 8bits
1bit 1bit, 2bits
NONE NONE, ODD, EVEN
DTR/DSR DTR/DSR, XON/XOFF
Valid Valid, Invalid
PC Setting PC Setting, DTR/DSR, XON/XOFF
432dots 436dots, 432dots, 420dots, 390dots, 384dots, 360dots
11mm 6mm, 7mm, 8mm, 9mm, 10mm, 11mm
Invalid Invalid, 3/4, 2/3, 1/2, 1/3, 1/4, 1/5, ALL
100% / 100% 100% / 100%, 75% / 100%, 50% / 100%, 100% / 75%,
75% / 75%, 50% / 75%
Invalid Invalid, 1 dot, 2 dots, 3 dots, 4 dots, 5 dots, 6 dots, 7
dots
Invalid Disabled, 1 h, 6 h, 12 h, 18 h, 24 h, 5 m, 10 m
15 m, 20 m, 30 m
PC437 PC 437, Katakana, PC 850, PC 858, PC 860, PC 863,
PC 865, PC 852, PC 866, PC 857, WPC1252, Space
page, PC 864, ThaiCode11 1Pass, ThaiCode11
3Pass, ThaiCode18 1Pass, ThaiCode18 3Pass,
TCVN-3
U.S.A USA, France, Germany, England, Denmark, Sweden,
Italy, Spain, Japan, Norway, Denmark 2, Spain 2, Latin
America, Korea, Croatia, China, Vietnam
OFF ON, OFF
JIS JIS, Shift JIS (PC932), Shift JIS (x0213)
100 % 70 %, 75 %, 80 %, 85 %, 90 %, 95 %, 100 %, 105 %,
110 %, 115 %, 120 %, 125 %, 130 %, 135 %, 140 %
Level 9 Level 1, Level 2, Level 3, Level 4, Level 5, Level 6,
Level 7, Level 8, Level 9
Invalid Invalid, CBM1, CBM2
Not By C. All Event/Error, Not by C.Open, Not by C.Open/PE
Open
Tone 2 Tone 1, Tone 2, Tone 3, Tone 4
178
—
OFF
Invalid
Invalid
Invalid
Fixed
Fixed
Fixed
Fixed
Fixed
Einstellwert
—
ON
Valid
Valid
Valid
—
—
—
—
—