Maintenance; Fuse Replacement; Dismounting The Unit - Sony XR-3700RDS Bedienungsanleitung

Maintenance

Fuse Replacement

When replacing the fuse, be sure to use one
matching the amperage rating stated on the
fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse
blows again after replacement, there may be an
internal malfunction. In such a case , consult
your nearest Sony dealer.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as
EN
this could damage the unit.
Cleaning the Connectors
The unit may not function properly if the
connectors between the unit and the front
panel are not clean. In order to prevent this,
open the front panel by pressing the RELEASE
button, then detach it and clean with a cotton
swab dipped in alcohol. Do not apply too
much force. Otherwise, the connector may get
damaged.
Back of the front panel
12
Actual total number
Fuse (15 A)
Main unit

Dismounting the Unit

1
2
3
4
E
Sony XR-3700RDS ( ,F,G,I) 3-856-273-12 (3)
Release key (supplied)