Kwazar NEPTUNE SUPER CLEANING PRO+ Bedienungsanleitung Seite 17

SPRAYER OPERATION
Place the assembled sprayer on a flat surface.
Unscrew the filling unit safety cap (Fig. 8/item 1).
Pour the previously prepared spraying liquid through the strainer underneath (Fig. 8/item 2). Any dirt which
may have found its way into the strainer should be discarded. Screw on filling unit safety cap. The strainer can
remain under the cap. Move the sprayer to the workplace. Now you can put the sprayer on your back and
adjust the straps. Lift the sprayer by the straps without the safety buckle. Adjust and fasten the hip belt.
Point the lance spray tip at the spray area and begin spraying by using the lever on the lance handle (Fig. 1 1/
item 2). Spray in the direction of the wind.
The lance can be extended to 1.2 m if required. To do this, loosen the conical nut (Fig. 9/item 1), slide out the
adjustable part of the lance (Fig. 9/item 2) to obtain the desired length (max. 0.54 m) and tighten the conical
nut (Fig. 9/item 1).
2
INSTRUCTION MANUAL
1
Fig.8
1
2
Fig.9
PL
EN
DE
RU
17