LED
Status
yellow
500 ms flashing
8
Operation
8.1
Basic settings in the AS-i network
Parameter
AS-i profile
I/O code
ID code
Extended ID2 code
ID1 code for code value
Slave address (factory setting)
Code values in hex format
8.2
Addressing
The read/write head is addressed using an addressing unit (e.g. AC1144), the
master or the AS-i software of the host (the components must support the AS-i
version 2.1).
►
Assign an address between 1 and 31.
8.3
Analogue value representation
For the AS-interface the read/write head is a slave having an analogue input
with the transmission protocol to the profile 7.4 or 7.3 (see above). If the master
operates to the master profile M3 or M4, it automatically detects the read/write
head and supports the profile 7.4.
For the analogue value transmission the profiles 7.3 and 7.4 are identical.
20
Description
writing of the ID tag not possible
–
ID tag not formatted
–
ID tag not in the detection zone
–
ID tag protected by lock bit
–
value outside the value range
–
invalid command
Read/write head
DTA100, DTA200,
DTA300
7.4
7
4
C
F
0
Read head
DTA101, DTA201,
DTA301
7.3
7
3
C
F
0