Installation; General Installation Instructions; Notes On Id Tag Mounting - IFM Electronic efector190 DTS125 Montageanleitung

Art. no. Function
DTA300 Read/write head
DTA301 Read head
5

Installation

5.1

General installation instructions

When mounting several read/write heads adhere to the minimum distances
between the systems.
Flush mounting of a read/write head in metal reduces the read/write
distance.
The immediate vicinity of powerful HF emission sources such as welding
transformers or converters can affect operation of the read/write heads.
Information on the available mounting accessories is available on our website at:
→ Data sheet direct → e.g. DTA100 → Accessories
www.ifm.com
5.2

Notes on ID tag mounting

If the ID tags are mounted in/on metal, the read/write distance is reduced.
For positioning the ID tags the read/write heads are marked with an an-
tenna symbol on the active face. It designates the middle of the integrated
antenna coil and has to correspond with the middle of the ID tag.
The orientation of the read/write head antenna axis must correspond with
the axis of the ID tag coil.
You can find out about the best way to position the available ID tags and on
mounting in metal on our website at:
→ Data sheet direct → e.g. DTA100 → Additional data
www.ifm.com
(General information about mounting and operation)
Type designation
DTS125 DCRWASUS
DTS125 DCROASUS
H x V x D [mm]
92 X 80 X 40
UK
7