Troubleshooting; Disposal Of The Appliance - Ayce VSM01C16Q Gebrauchsanweisung

TROUBLESHOOTING

In case of malfunction, please refer to the following table.
Problem Possible causes
3 lamps for The brushroll is
power indicator wrapped
flicker Temperature is too high
or low
Power brush - Brush is trapped by
does not work hair or large debris
Running time - Battery aging
shortened - Ambient temperature
is too high or too low
- Battery is not fully
charged
The vacuum has - The dust cup is full
no suction power - The filter is blocked
- Suction inlet of brush
or other accessory is
blocked
- Parts of the appliance
is not fully dried after
cleaning
MAX indicator - The filter or duct are
flickers blocked
No charging - Ambient temperature
when charging is too
low or too high
Solution
- Cleaning the rolling bar
- Move the vacuum to suitable
temperature
- Ensure that no hair or other
thread is trapped around the
brush and check brush area
for larger debris
- Contact the shop or after
sales service to replace the
battery (at the user 's own
cost)
- Your vacuum should only be
operated in suitable ambient
temperature
- Clean the dust cup after use
to prevent build-ups
- Remove any dust or debris
from the filter
- Check for blockages at
brush and other attachment
points
- Ensure that all components
are properly dried after
washing
- Clean the dust filter, dust
cup and air duct
- Charge the machine under
the right temperature
environment (5°C-40°C)

DISPOSAL OF THE APPLIANCE

This symbol on the product or in the instructions means that your
electrical and electronic equipment should be disposed at the end
of its life separately from your household waste. There are
separate collection systems for recycling in the EU. For more
information, please contact the local authority or your retailer
where you purchased the product.
68 | 69
GB