Ayce VSM01C16Q Gebrauchsanweisung Seite 32

Battery Replacement
To replace the battery contact the store where the appliance was purchased.
The battery needs to be replaced when: a. running time is shorter
Notice:
1. The vacuum must be turned off before removing the battery.
2. Do not use or store in locations where the temperature is lower than 5°C or
higher than 40°C.
3. Remove the battery before dispose the appliance.
4. The appliance must be serviced or repaired by a specialized technician.
Battery recycling/disposal: Batteries consume important quantities of natural
resources, thus they should be recycled.
b. Longer charging time
Press the battery release button
Take out the battery
Docking Station
Screw holes
≥15 cm
120~125 cm
≤80 cm
Floor
≈5 cm
Floor Floor
6*30mm expansion pin
Tips: When installing the docking station, 4*30 mm screw is suggested on the
wooden surface. The 6*30 mm expansion pin and 4*30 mm screw should be used
on the cement surface.
≈5 cm
Floor
62 | 63
GB
1. Installation diagram
3
2. Fix on the wall
3. Hanging the product
& accessory
Floor