Notes - TFA HUMIDCheck PRO Bedienungsanleitung

Scottellia coriacea
Sequoia sempervirens
Shorea smithiana
Shorea spp
Sterculia rhinopetala
Swietenia candollei
Swietenia mahogani
Syncarpia glomulifera
Syncarpia laurifolia
Tarrietia utillis
Taxus baccata
Tectona grandis
Terminalia superba
Thuja plicata
Tujopsis dolabrat
Tieghamella heckelii
Tilia anericana
Tilia vulgaris
Triploehiton scleroxylon
Tsuga heterophylia
Ulmus amercana
Ulmus procea
Ulmus thomasii
Xylia dolabriformis
Zelkova serrata

NOTES:

The calibration data in this table are based on standard tests by oven-drying of
commercial samples of the various wood species, between 7% and fibre saturation.
Above fibre saturation point (25%-30%) reading are approximate only and generally
apply to wood that has dried and been re-wetted.
The instrument is calibrated for wood at 20°C (68°F). If the temperature of
wood varies by more than 5°C, the meter reading can be corrected approximately by
adding 1/2% for every 5°C below 20°C or subtracting 1/2% for every 5°C above
20°C.
Readings higher by 1%-2% may be obtained where wood has been
impregnated with a water-borne preservative.
High readings obtain with some ply-woods of peculiar composition must be
treated with caution.
E
B
G
B
A
A
B
C
C
C
C
F
A
C
J
B
G
E
G
C
E
E
E
E
B
- 25 -