Proper Use; For Safe Operation; Safety Information - led2work PROFILED AC Serie Betriebsanleitung

PROFILED AC

1 | Proper use

The luminaire is used for illumination and can be in use in long-therm usage. You can
mount the luminaire at a t-nut profile. The connection is via the supply cable and the
Schuko plug at a 230V AC. power supply system.
The safety information and all other information in this manual must
be followed. Read the entire operating manual carefully before
mounting and turning on.
Keep the operating manual with the device. It must be stored and
handed over to third parties when the product is passed on.

2 | For safe operation

The operating parameters of the LED luminaire specified on the type plate must cor-
respond to the supply parameters of the machine or of the transformer.
Under no circumstances may the luminaire be covered with cloths,
foils or similar. Object distance from the luminaire should be at
least 10 cm.
Machines or devices can emit voltage spikes due to various fac-
tors. These voltage spikes in the power supply via machines
or devices should be avoided!
Operate the luminaire only in a mounted status.

3 | Safety information

Installation of electrical equipment may only be carried out by quali-
fied electricians.
Follow the five safety rules according to DIN VDE 1005.
Failure to do so may result in damage to the LED luminaire, as well
as fire or other hazards.
Danger of electric shock! Disconnect before working on the
device or load. Ensure to disconnect all circuit breakers that supply
dangerous voltages to the device or load, when doing so. Even
when the device is switched off, the load is not galvanically isolated
from the mains.
Only use the device if it is completely free of faults, and with safety
and awareness in mind.
If warnings or symbols are attached to the luminaire, they must not
be removed.
| 9
www.led2work.com