Ce Marking And Conformity; Disposal - Saito 60901901 Original-Gebrauchsanleitung

exchanged become the property of the dealer. The purchaser must inform the
dealer without delay of any faults that may be found. The right to claim under the
warranty must be supported by the provision of proper proof of purchase (receipt,
invoice etc.). Damage resulting from incorrect handling, operation or storage,
force majeure or other external influences, are not covered by the warranty.
We accept no liability for any damage resulting from modifications made by the
user, and the user will hold us indemnified against any third-party claims made
arising from such modifications. Unless otherwise stipulated above, our current
Standard Terms and Conditions of Business apply.
Any further claims made against the seller as a result of these warranty
obligations, in particular claims for consequential damage due to loss of profits,
compensation for use and indirect damages, cannot be asserted if no mandatory
liability is defined by law.
In the following cases, the warranty will be rendered null and void and the device
will be returned at the cost of the purchaser:
• In case of modifications and attempts to perform repairs on the device or in
case of unauthorised modification of the circuit.
• If the device is connected to the incorrect voltage or current type.
• If accessories are used other than those recommended by the manufacturer.
• In case of damage caused by failure to adhere to the instructions for use/wiring
diagram.
• In case of damage as a result of intervention by external persons.
• In case of incorrect operation or damage caused by negligent use.
• In case of faults which are caused by bypassed fuses/circuit breakers or the
use of incorrect fuses/circuit breakers.

15 | CE marking and conformity

Detlev Louis Motorrad-Vertriebsgesellschaft mbH hereby declares
that this charger complies with the basic requirements and the other
applicable conditions of the Directives 2014/35/EU and 2014/30/EU.

16 | Disposal

Dispose of packaging material and the product itself according to
applicable local regulations.
39