Interrupting The Charging Process; Charging Time; Specifications - Saito 60901901 Original-Gebrauchsanleitung

engine block, and then the remove the red charging clamp (positive) from the
battery's positive pole.
- Option B - Charging the battery after removing it from the vehicle:
First remove the black charging clamp (negative) from the battery's negative
terminal, and then the remove the red charging clamp (positive) from the
battery's positive pole.

9.3 | Interrupting the charging process

Charging can be interrupted or ended at any time. Always disconnect the charger
from the power supply (pull out plug) and then disconnect the charger from the
battery.

9.4 | Charging time

Please note that the charging processes may take different lengths of time. The
charging process for a large battery with a capacity of more than 100 Ah, for
example, can easily take longer than two days, depending on the condition of the
battery (old or new battery; flat or deeply discharged battery etc.).

10 | Specifications

Operating voltage
End-of-charge voltage
Charging current
Housing protection class
Operating conditions
Storage conditions
Dimensions (W x H x D)
Weight
Length of power cord
Length of charging cable (total)
Suitable battery types
Battery voltage
Battery capacity (recommended) 1.2 Ah to 120 Ah
220-240 V/AC (50/60 Hz)
7.2/ 7.4/ 7.6 V for a 6 V battery,
14.4 V/ 14.8 V for a 12 V battery
1 A up to 4 A max. (depending on the
charging mode)
IP65
-15°C to +45°C, 10% up to 90% relative
humidity, non-condensing
-20°C to +60°C, 10% to 90% relative humidity,
non-condensing
approx. 170 x 46 x 76
approx. 300 g
approx. 145 cm
approx. 150 cm
lead-acid, lead-gel, lead-fleece, AGM,
calcium and pure-lead vehicle batteries
6 V (3 cells), 12 V (6 cells) with lead batteries
37